Showing posts with label set. Show all posts
Showing posts with label set. Show all posts

Sunday, May 12, 2013

How to Set the Analog Clock on the 2007 Mercedes E350


1. Press the + or - buttons on the vehicles steering wheel until the Time and Date menu appears on the digital display.
2. Press the Up or Down arrow buttons until the Clock, Hours message appears on the digital display.
3. Use the steering wheels + or - buttons to adjust the clocks hours digits to the current time. Press the small Reset button next to the analog clock to save your changes to the hours digits.
4. Access the vehicles Time and Date menu again using the + or - buttons on the steering wheel.
5. Press the Up or Down arrow buttons to cause the Clock, Minutes message to show on the digital display screen.
6. Set the minutes digits to the desired time with the + or - buttons. Press the Reset button next to the analog clock to save your changes to the minute digits. Note that the analog clocks hands will move to reflect the current time.

Wednesday, May 8, 2013

How to Set Memory Seats


1. Open your car door and sit down in the drivers seat. Close the door, as you will also need to position the drivers side mirror.
2. Use the levers and mirror adjustment buttons to configure the seats and mirrors until everything is as comfortable as possible. There is a lever that adjusts the horizontal position of the seat by moving it closer or further away from the steering wheel, as well as a lever that adjusts the vertical incline of the seat back.
3. Locate the memory seat buttons on the side of the seat, between the seat and the door. Depending upon the model of your vehicle, there will be two or more numerical buttons, as well as an M, Memory or Set button.
4. Press the M, Memory or Set button, then press the number to which you are assigning these seat settings. If your memory seat controls only have numerical buttons, hold down one of the number buttons for five seconds, or until your hear a noise.
5. Move an aspect of the seat settings, then press the numerical memory seat button that was just assigned to verify that the seat settings have been saved to memory. If the memory seats are set correctly, then the seat will move to the settings you previously saved.