Auto Service

1. Close all the doors and the trunk.
2. Open the drivers-side door, and get in the car. Shut the door.
3. Put the key in the ignition.
4. Turn the key from the on position to the off position five times quickly without starting the engine.
5. Pull the key out of the ignition.
6. Press and hold the unlock button on your remote.
7. Press the lock button three times while continuing to hold the unlock button.
8. Release the unlock button. Once youve released the button, the door locks will begin to cycle, indicating that the remote has been properly programmed. If this does not happen, begin again from Step 1.
9. Put the key back into the ignition, and turn it from on to off once more to set the remote programming.

1. Enter your car and turn your ignition key to the ACC position. Be sure to have your LiftMaster handheld remote with you.
2. Press and hold the two outer buttons on the HomeLink system until the LED light on the system starts blinking.
3. Hold your LiftMaster remote two inches away from the HomeLink system and hold the Open button on your remote and the button you would like to program on your HomeLink system.
4. Release the two buttons when the LED light on the HomeLink system starts to flash more rapidly.
5. Press and hold the Training button on the onboard system until the LED light stops blinking and the programming will be completed.